Anti-static bars 

The emitter pins of the Super Service anti-static bars are directly coupled to the high voltage so that maximum ionising current is reached. These bars can be cleaned easily andtherefore they are suited for being installed in places which may be subject to heavy fouling. Touching an emitter pin will cause an unpleasant electrical shock. These bars are usually installed in such a manner that the emitter pins cannot be…

The properties of this SIMCO anti-static bar are the same as those of type MEB, except that the MEJ type is round. Therefore mounting this antistatic bar via holes in the machine frame is possible.

Each individual emitter point of this rectangular anti-static bar is coupled capacitively to the high voltage. You will there fore not get an electrical shock when the emitter pins are accidentally touched. Another advantage is that the bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling.

The Performax IQ uses an entirely new static bar design utilising emitter points constructed of special alloys for extended operation and to provide maximum neutralisation of high static charges on high speed and distance applications. The IQ bars include a unique connection design which enables the power supply to recognise the application requirement and automaticaly set the output power…

The rugged Performax Easy static neutralising system, with reinforced profile offers superiour deflection performance that minimizes damage due to (accidental) bending. The Performax Easy has an integrated high voltage power supply and requires only a low voltage input of 24V DC. It is equipped with a standard M12 connector for the 24V DC input. The emitter pins are shockless.…

Active ionization equipment operates on high voltage. The power units transform the mains voltage to the high voltage required by the ionizer. There are different types of power units available. Power units are easily connected and operated and don’t need any maintenance.

The ThunderION offers long distance static elimination even up to one meter. The robust design of the reinforced extruded profile allows the use in industrial environment up to even 4m lenght. The disc shaped emitters produce a high and balanced ion output. When accidently damages they can be easily be replaced. The ThunderIon has an integrated high voltage power…

The PerforMAX 3 is the most advanced static control system available for monitoring static neutralizing performance. PerforMAX 3 provides outstanding extended range performance to eliminate static charges even when installed 5 to 25 cm from webs (depending on conditions), and up to 50 cm on winders. This system is also capable of neutralizing charged materials traveling up to 750…

Each individual emitter pin of the MaxION anti-static bar is coupled capacitively to the high voltage. You will therefore not get an electrical shock when the emitter pin is accidentally touched. The rugged MaxION static neutralising bar has a reinforced profile that minimises damage due to accidental bending. The ground reference is embedded in the reinforced profile. The slide…

This type of anti-static bar, a more powerful version of the EP-Sh-N is highly effective and, with its long range, ideal for neutralisation of static electricity on materials when the distance varies. Under certain conditions the maximum distance may even be as large as 600mm.

Each individual emitter pin of this anti-static bar is coupled capacitively to the high voltage. You will therefore not get an electrical shock when the emitter pin is accidentally touched. Another advantage is that the bar continues to function properly when a number of emitter pins are shortcircuited, for instance due to heavy fouling. Under certain conditions the bar…