Other 

The RC-21 determines the resistance of corrugated to withstand wet conditions by immersion in water. This test method is applicable to all types of corrugated and in particular to corrugated types in which a high degree of resistance to wet conditions is required.

The FP-2255 can be configured to measure the coefficient of friction, peel strength, seal strength and tensile strength of flexible plastic films, paper, sheet materials, labels, tapes and textile materials.

It is useful in many industries such as paper, plastic, adhesives, textile, flexible packaging, foils, coatings, leather and paperboard industries as well as others.

The internal bond tester uses the dynamic measuring principle to determine the internal bond strength of paper, board and compound materials according to TAPPI T569 pm-00 – Scott Bond method.

MasterScreenTM XLQ model is a low consistency screening device designed to mechanically separate fibres from contaminants, including stickies, dirt, shives, vessel cell elements, plastics and hot melts. Contaminants are deposited automatically onto a filter paper for display and analysis.

This unit is useful for evaluating secondary fibre and predicting production pulping results. The standard MaelstromTM pulpers work in the consistency range of 0 - 7 % and are completely made of stainless steel. Other available pulpers can go up to a 15 % consistency or up to 1800 grams at 6 % consistency. Efficient and trouble free, this…

The laboratory digesters AU-E/20 and AU-E/4 are used for chemical, semi-chemical, thermal and bleaching pulping studies in the pulp and paper industries. The AU/E-20 is a 20 liter cooking vessel, mainly used in small sized production lines. The AU/E-4 has four 1,5 liter cooking vessels and is mainly used for research and development.

This is a flotation cell for the de-inking of recycled papers. It is especially designed for evaluating the procedures, chemicals and processes required to handle the rapidly increasing use of recycled paper. The flotation de-inking cell provides ink removal efficiency similar to commercial scale units through precise control of injection flow and pressure.

The D-150 Homogenizer is indispensable for the correct preparation of pulp suspensions to be used in the determination of refining degree.

The crush tester CT-2000 determines the compression strength of corrugated fibreboard and its components for quality control and research and development. This equipment is absolutely user friendly and its operation can easily be done through its built-in testing software, alphanumeric backlighted display and membrane keyboard. It offers complete statistics, a parallel port for the connection of a local printer…

The fiber classificator is used for the separation of pulps into fines, shives and useful fibers fractions.

Spec*Edge is a scanner-based image analyser for measuring the quality of paper edge, size and hole parameters. It was developed in cooperation with members of the paper manufacturers industry to give an accurate and non subjective means to mea-sure the quality of the cut sheet at the slitter. This system was designed so that the slitting machine operator can…

Spec*Scan is a scanner-based image analyser for quantifying dirt specks, shives and stickies. As the world’s leading software for measuring and analysing impurities in pulp, paper and paperboard, users rely on Spec*Scan to: Optimise pulp screening and bleaching systems Maintain cost control for raw materials and pulp mixing Provide accurate, reproducible results for day-to-day, reel-to-reel dirt content quality control…